- CALL NOW (201) 730-9270
Every chimney gets a full inspection before we quote, so you know exactly what needs fixing and what doesn’t!
Our Chimney Services
Most homeowners need repair, rebuild or cleaning services related to the chimney.
A crack that looks minor today becomes bigger within months. We fix structural damage, faulty flashing, and worn mortar joints while the work is still straightforward, before the freeze-thaw cycle turns it into a bigger job. This is also where cap and chase cover work usually happens. A failed cap lets rain, birds, and debris straight down the flue. A rusted chase cover lets water spread through the chase walls before it shows up inside the house. Both are simple fixes that head off costly damage.
Some chimneys are beyond repair. When the bricks are cracked, the surface of the bricks is breaking off, or the chimney is leaning, it is a sign that the chimney needs to be torn down and rebuilt from scratch rather than fixed again. The chimney needs to be rebuilt, not just patched up again. We demolish the damaged section and rebuild it with new materials, built to withstand New Jersey weather for decades, not just get you through one more winter.
Every fire leaves creosote behind. It builds up inside the flue layer by layer. Creosote buildup becomes a fire hazard over time. We reline it wherever the existing liner has cracked or broken down. Firebox lining, damper repair, and fireplace insert work usually fall under this service too, since they affect whether the fireplace is safe to light.
No cap on your chimney means rain can go straight down the flue, and birds and squirrels can nest there, bringing in debris. Give it enough time, and that stuff piles up at the bottom of the flue. At USA Roofing & Chimney, we size a cap to fit your specific flue and get it installed so it keeps everything out without choking off the draft. It’s honestly one of the cheapest things you can do for a chimney; most people never think about it until something’s already gotten in there.
That factory-built chimney’s metal cover endures weather year after year. Once it starts rusting, water finds the seams and starts working its way down into the chase walls. Most homeowners do not notice it until it shows up inside the house, and by then it has usually spread farther than expected. When we replace a chase cover, we make sure it’s sloped the right way so water actually runs off instead of pooling and looking for a way in.
Chimney damage builds slowly, then appears all at once. Here are the warning signs our inspectors look for most
Smoke drifting into the living room instead of rising the flue usually means the liner has cracked or broken.
Chalky white marks on the outside masonry means moisture has already worked its way into the chimney structure.
Staining near the chimney line almost always means water has gotten past the flashing or crown.
Rust streaking down the chimney is usually the first sign the cap or chase cover is starting to fail.
A smoky or musty odor with no fire burning points to a flue liner that’s already deteriorating.
Bricks that are chipping, cracking, or crumbling mean the damage has gone past a simple repointing job.
A chimney problem is not usually visible from the street. You might have worn-out mortar joints and a small crack in the crown of the chimney. These things do not seem like a big deal until water gets into the chimney. In winter, this water expands, making the crack in the crown a little wider each time it freezes and thaws.
Our team looks at the liner, the crown, the flashing, the mortar joints, the firebox and the damper of the chimney. We include everything we find in a report so you know exactly what is wrong with your chimney and why it needs fixing before we agree to any work.
Most chimney repairs in New Jersey run between $300 and $2,500, depending on the damage. Small mortar or flashing fixes sit at the lower end, while cap or crown replacement runs higher. A written quote after inspection gives you the real number for your chimney.
Signs like smoke backing into the room, a musty smell with no fire lit, or visible cracks in the flue usually mean the liner has failed. A camera inspection confirms it before any relining work starts.
Most chimneys should be inspected once a year, ideally before the colder months start. Homes with wood-burning fireplaces used often may need a check twice a year to stay ahead of creosote buildup.
A standard chimney cap typically costs between $150 and $500 installed, depending on flue size and material. Custom-fit caps built for irregular flues sit toward the higher end of that range.
A leaning chimney, bricks that are cracked or breaking off, or repeated failed repairs are the clearest signs. At that point, patching the same spot again usually costs more over time than a full rebuild.
Get a free chimney inspection before a small crack becomes a bigger repair, we’re here to help. Call us today!